Smoke odor that keeps coming back
We treat the source with thermal fogging, ozone, and hydroxyl generators, then seal surfaces with smoke sealant primer. That combination stops the off-gassing instead of masking it.
When fire hits, every minute counts. Our 24 hour fire restoration in EDWARDS, California puts a certified crew on your property within 60 minutes, day or night. We handle soot, smoke odor, water from firefighting, and structural charring so you can get back inside safely. Call now for emergency fire damage restoration in EDWARDS and we will walk you through the first steps while we roll.

24 hour fire restoration in EDWARDS, California is the emergency service that stabilizes your property after a fire and starts reversing the damage the same day. It covers board-up, soot removal, smoke odor neutralization, water extraction from firefighting efforts, and structural drying before mold sets in. Our technicians use thermal imaging cameras and moisture meters to map hidden heat and water damage, then HEPA air scrubbers and hydroxyl generators to clear the air. The goal is simple: make the structure safe, stop secondary damage, and give you a clear path back to normal.
Most EDWARDS calls we take involve kitchen fires, electrical fires in older homes, and attic fires that spread through insulation. Smoke odor penetration is the complaint we hear most, because soot residue on walls and ceilings keeps off-gassing for weeks if it is not sealed. If you search for emergency fire restoration near me EDWARDS at 2 a.m., you need a crew that answers the phone and shows up. We do both, and we bring the drying equipment and odor counteractant chemicals on the first truck.
Every 24 hour fire restoration in EDWARDS starts with the same core scope. Some jobs need more, depending on how far the smoke traveled and how much water the hoses left behind. Here is what is covered as standard and what we add when the damage calls for it.
We secure windows, doors, and damaged roofing shingles so the structure is weather-tight and secure. This happens on the first visit, usually within the first 1 to 3 hours on site.
Firefighting water gets pulled with extractors, then air movers and dehumidifiers run until moisture readings hit dry standard. Most homes dry in 3 to 5 days.
Dry and wet soot sponges, chemical sponges, and HEPA vacuums remove residue from walls, ceilings, and contents. We treat HVAC filters and ducts so contamination does not recirculate.
Thermal foggers, ozone generators, and hydroxyl generators treat the air and surfaces, followed by smoke sealant primer on affected walls and framing to lock in residual odor.
Photos, moisture logs, and a written scope of loss go to your adjuster. We follow NFPA 921 standards so the record holds up to review.
Our CSLB-licensed crew rebuilds charred framing, drywall, insulation, and roofing to California Building Code, so you have one contractor from start to finish.
You call, we answer live, and we dispatch the nearest crew. Our average on-site time in EDWARDS is under 60 minutes. While the truck rolls, we ask about the fire's location, whether the power is shut off, and whether anyone is injured so we can advise you on what to do before 24 hour fire restoration arrives in EDWARDS.
We secure the property first: board up broken windows, tarp damaged roofing shingles, and shut off utilities if needed. Charred roof trusses and melted plumbing pipes get flagged immediately. This step usually takes 1 to 3 hours depending on the size of the structure.
A certified technician walks the property with a thermal imaging camera and moisture meter, mapping char, smoke travel, and water intrusion. We photograph and measure every affected room, then send the scope to your insurance adjuster. This is the record your claim is built on.
Crews remove soot with dry and wet sponges, extract standing water, and set HEPA air scrubbers to capture airborne particles. HVAC filters and duct sealing materials go in to stop contamination from recirculating. Most single-family homes take 2 to 5 days for this phase.
Air movers and dehumidifiers run until moisture readings hit dry standard, usually 3 to 5 days. Then we treat odor with thermal fogging and hydroxyl generators, seal surfaces with smoke sealant primer, and complete structural repairs to California Building Code. You get a final walkthrough and a written warranty.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Finds hidden heat pockets and water intrusion behind walls and ceilings so we do not miss damage that is out of sight.
Captures airborne soot and smoke particles down to 0.3 microns, keeping indoor air breathable during cleanup.
Neutralizes smoke odor safely in occupied spaces, unlike ozone, which requires the area to be empty.
Pushes odor counteractant chemicals into wall cavities, ducts, and upholstery where smoke molecules settle.
Tracks moisture content in framing and drywall and pulls water vapor out of the air until the structure reads dry.
Removes heavy char and soot from framing and masonry without abrasive damage to the surface underneath.
Cleans smoke residue from delicate surfaces like brick and metal fixtures where harsher methods would scratch.
A grease fire charred the cabinets and sent soot across 900 square feet of living space. Smoke odor was strong in the bedrooms, and the ceiling had visible residue.
We removed the charred cabinets, cleaned and sealed the ceilings, ran hydroxyl generators for 48 hours, and rebuilt the kitchen. Final air quality test passed, and the homeowner moved back in on day 12.
An attic fire burned through insulation and charred three roof trusses. Firefighting water soaked the ceiling drywall below, and moisture readings hit 28 percent.
We tarped the roof the same night, replaced the trusses and insulation, and ran dehumidifiers for four days. Final moisture readings came in under 12 percent, and the roof passed inspection.
An outlet fire charred a bedroom wall and filled the unit with smoke. The tenant was displaced, and the landlord needed documentation for two insurance policies.
We isolated the circuit, removed the charred drywall, cleaned and sealed the room, and rebuilt the wall to code. The unit was rentable again in 18 days with a full photo log for both claims.
Most fire damage we see in EDWARDS is not the flames. It is what happens in the 24 to 72 hours after: soot etching, smoke odor settling, water soaking into framing, and mold starting. Here are the problems we hear about most and how we handle them.
Ask a pro →We treat the source with thermal fogging, ozone, and hydroxyl generators, then seal surfaces with smoke sealant primer. That combination stops the off-gassing instead of masking it.
Our technicians use dry soot sponges first, then wet cleaning agents matched to the surface, so residue lifts without smearing or scratching.
We extract standing water, set air movers and dehumidifiers, and monitor moisture with meters until the structure reads dry, usually in 3 to 5 days.
We replace HVAC filters, seal ducts with duct sealing materials, and run HEPA air scrubbers to capture airborne particles before the system is restarted.
Yes. Our 24 hour fire restoration in EDWARDS, California runs every day of the year, including holidays. We answer live calls around the clock and dispatch the nearest crew, with an average on-site time under 60 minutes. There is no after-hours surcharge for the emergency response itself.
Our average on-site time in EDWARDS is under 60 minutes from the moment you call. Dispatch depends on where the crew is when the call comes in, but we stage equipment across the area so a truck is never far away. We will give you an ETA on the phone and call if anything changes.
No. Our 24/7 fire restoration EDWARDS California pricing is the same at 2 a.m. as it is at 2 p.m. Typical 2026 pricing in this area runs $3,500 to $18,000 for most residential fire restorations, depending on square footage, soot spread, and whether structural rebuild is needed. You get the estimate before work begins.
Get everyone out, call 911 if the fire is still burning, and do not re-enter the structure. If the power is on and it is safe to reach the panel, shut it off. Leave doors and windows closed to limit smoke travel, and do not wipe soot, because smearing it spreads the residue. We will walk you through the rest on the phone.
Fire damage gets worse by the hour. Our crew is standing by around the clock, licensed and insured, with an average on-site time under 60 minutes. One call starts the process: board-up, documentation, soot removal, and a clear plan for rebuild.
Get Emergency Help (833) 929-6186 →If a fire has damaged your home or business, call us at (833) 929-6186. A live dispatcher answers 24 hours a day and sends a crew to your EDWARDS address, usually within 60 to 90 minutes for emergency calls. We will confirm a response window before we hang up.